Crane lift safety checklist full#
Crane lift safety checklist free#

All safety and maintenance checks, for all cranes, should be logged on the overhead crane safety inspection checklist, along with all findings and work undertaken to remedy any problems/defects. Standby overhead cranes, and mothballed cranes, should all be subject to these safety/maintenance checks. Tyres should be checked for damage and tread wear. Look for burning or scorching in the boxes or connections, and pitting on contacts, limit switches, and push-button boxes. All electrical equipment should be checked. Chain lifting gear should be checked for stretching, and sprockets examined for wear. Check wind, load and other operation indicators for discrepancies. Check brakes and brake linings, clutch systems, and pawls and ratchets. Look for wear and cracks in rollers, bearings, shafts and gears. Check and operate clamps and locking systems. Examine for stretched or loose rivets, bolts, and pins. These are in addition to the normal operating safety checks and should be undertaken by a fully qualified engineer or competent person.Д¬heck the whole unit for cracks, deformities and corrosion.

This can be anything from monthly to bi-annually, or annually. Your overhead crane inspection frequency should be defined in the overhead crane safety inspection checklist to ensure that it is completely clear and your inspections remain consistent. Periodic overhead crane inspection/maintenance procedures. Essentially, the operator should ensure the area is clear prior to operation. The overhead crane safety checklist should include a provision to record and rectify any instances of unauthorised staff working within the area, or materials or equipment which may impede the crane or its load during operation. The crane operator should also be responsible for the area the crane will be operating in. Inspect all flexible and rigid hydraulic pipes and joints for signs of hydraulic oil seepage, splits, or fraying. If it drops, the crane must not be operated until the fault has been rectified. Overhead crane safety procedures should also include testing the hoist brakes by turning the master switch to OFF, or hitting the emergency OFF button, with a load raised a few inches off the floor. Web and nylon slings should be checked for stretching, rips and fraying, and replaced as required. Visually check all lifting gear including chains and steel cables for signs of wear or fatigue.

Crane lift safety checklist free#

Ensure the bottom block is free and not twisted. Check the steel lifting cable is seated correctly in the drum grooves. Check all audible warning devices are operational.

Working from the overhead crane safety checklist the operator should check the power source to the vehicle, all limit switches, and test emergency power shut down buttons.

Crane lift safety checklist full#

On a daily basis, or on every shift change, the crane operator needs to carry out a full safety inspection of the crane they are about to operate. What is involved in overhead crane safety procedures? This blog discusses overhead crane safety checklists in detail to ensure that you are aware of all the aspects that need to be carefully considered to ensure optimum safety. By rigorously adhering to the overhead crane inspection frequency, maximum safety with minimum downtime can be obtained from the machine. In conjunction with the manufacturerвЂ™s operating and maintenance instructions, this overhead crane safety inspection checklist can be used as the basis for daily inspections, and periodic maintenance schedules. To ensure maximum safety and minimise accidents when using an overhead crane, a comprehensive overhead crane safety inspection checklist should be drawn up.

Overhead Crane Safety Checklist: Inspection and Requirements

(NVQ) NATIONAL VOCATIONAL QUALIFICATIONS.

SPIERINGS SK1265-AT6 MOBILE TOWER CRANE.